Phase 1: Hardware Setup

1. Connect the two parts of the Power Adapter together, then plug the power cable into the back of the printer and into a wall outlet.

2. Plug the LAN (Ethernet) cable into the network port on the back of the printer, and connect the other end to your network router or switch. [Insert image of the power and LAN cable connections on the back of the printer here]

Phase 2: Calibration & Locating the IP Address

1. Turn the printer ON.

2. Press and hold the Light button on the top of the printer until the indicator light begins to blink.

3. Release the button, then immediately click the Light button 1 time.

4. The printer will print out a calibration configuration sheet. Look at this sheet to locate the printer's IP Address, as you will need it for the next phase. [Insert image of the printed calibration sheet highlighting the IP address here]

Phase 3: Connecting to the Inventory App

1. Open the Inventory App on your device and sign in.

2. Select any item from your inventory list.

3. Scroll down until you locate the Connect printer IP field. [Insert image of the app screen highlighting the Connect printer IP field here]

4. Enter the exact IP Address you found on the calibration sheet.

5. Tap Update to test and verify that the connection is successful.

6. Tap Print to generate a test label.